§ 25607.10. Wood Dust Exposure Warnings - Methods of Transmission
(a) A warning for consumer product exposures to wood dust by drilling, sawing, sanding, or machining raw wood products meets the requirements of this subarticle if it complies with the content requirements in Section 25607.11 and is provided using one or both of the following methods:
(1) The warning is displayed either at the point of sale or display of the raw wood products in a manner likely to be seen by the purchaser. The notice or sign must be no smaller than 8 1/2 by 11 inches and printed in no smaller than 20-point type.
(2) Where the product is sold in bulk form, the warning may be provided on an invoice or receipt for the raw wood products in no smaller than 12-point type.
(b) "Raw wood products" include logs, sawn lumber, plywood and composite wood panels, engineered structural wood products, and similar wood products that are for the most part uncoated and have not been processed into other useful products and have the strong likelihood to be sawed, sanded, or drilled so as to generate wood dust.(1. New section filed 8-30-2016; operative 8-30-2018 pursuant to Government Code section 11343.4(b)(2) (Register 2016, No. 36). 2. Change without regulatory effect amending section heading and subsections (a)(1)-(2) filed 1-9-2017 pursuant to section 100, title 1, California Code of Regulations (Register 2017, No. 2).)
Note: Authority cited: Section 25249.12, Health and Safety Code. Reference: Sections 25249.6 and 25249.11, Health and Safety Code.
Disclaimer: This content is regularly reviewed to ensure the information is current and accurate. However, Section 25607.10 Wood Dust Exposure Warnings - Methods of Transmission may have been updated since our last review. For the latest version of all legislation, please check the official resources.